|
CLICK TO ORDER |
BWA BRASS
CHASSIS
 |
BW50100
BASIC
Adjustable Brass Billit and Tube Chassis
with Axles and Bushings
OUT OF
PRODUCTION
NLA
$20.00 |
BW50101
BASIC
Adjustable Brass Billit and Tube Chassis
with Axles and Bushings Plus Guide
OUT OF
PRODUCTION
NLA
$23.00 |
BW50102
BASIC
Adjustable Brass Billit and Tube Chassis
with Axles and Bushings
Plus Wheels and Inserts
(your choice)
OUT OF
PRODUCTION
NLA
$32.00 |
BW50103
BASIC
Adjustable Brass Billit and Tube Chassis
with Axles and Bushings
Plus Wheels and Inserts
(your choice) Plus Guide
OUT OF
PRODUCTION
NLA
$35.00 |
CHASSIS BITS
 |

BWB50010
BILLIT BRASS INLINE MOTOR BRACKET.
Will fit all Can Drive S Cans,FK and FC Motors(Falcon Cheetah
ect),all C and D cans(Parma/Mura etc)
No Longer Available |
BWB50020
Mounting plate for Mini Motors.
New Scaley F1 and Moto GP Motors etc.
This is a motor mount plate only, and, does not have rear axle/bushing arms.
$1.50/each |

BWB50021
Motor Bracket for Slimline Mini Motors
FA030 and FA050
Good match with BWB50022
$3.00/each |

BWB50022
Front end piece for chassis with Mini Motors.
Good match with BWB50021 $3.00/each |
HARDWARE
 |
|
BWHBS256PH
2-56 X 3/16 Brass Pan Head Screw
$1.50/10 |
BWHBS440PH
4-40 X 3/16 Brass Pan Head Screw
$1.50/10 |
BWHBN256
2-56 Brass Nut
$1.00/10 |
BWHBN440
4-40 Brass Nut
$1.00/10 |
BWHBI256-P
2-56 Threaded Brass Insert Plain
$3.00/10 |
BWHBI256-F
2-56 Threaded Brass Insert Flanged
$3.00/10 |
BWHBI256-P
4-40 Threaded Brass Insert Plain
$3.00/10 |
BWHBI256-F
4-40 Threaded Brass Insert Flanged
$3.00/10 |
BWHS24mPH
2mm x 4m
Phillips Panhead Screw for Mounting Motors etc.
$1.50/10 |
AXLES & BUSHINGS
 |

BW50050
3/32 x 3/16 OILITE BUSHINGS
$1.50/pr. |

BW50051
1/8 x 3/16 OILITE BUSHING
$1.50/pr. |

BW50052
3/32 x 1/4 OILITE BUSHING
$1.50/pr. |

BW50053
1/8 x 1/4 OILITE BUSHING
$1.50/pr.
|

BW50060
3/32 Drill Blank Axle
TOS |
BW50061 1/8
Drill Blank Axle
$1.50/ea |
BW50062
3mm
Drill Blank Axle
Available soon
$1.50/ea
NYA |
BW50063
1.5mm
Drill Blank Axle
Available soon
$1.50/ea
NYA |
|
BW50064
2mm
Drill Blank Axle
Available soon
$1.50/ea
NYA |
BW50065
1.5mm x 50mm Precision Drive Shaft
$1.50/ea |
BW50066
2mm x 50mm Precision Drive Shaft
$1.50/ea |

BWADTUB152Adaptor Sleeve
1.5mm-2mm
Comes in 2" Lengths
Enough for 6-8 Sleeves
$1.50/ea
TOS |
GEARS
 |
These BWA Pinions are of a somewhat different design, being bored a slight
loose fit rather than press fit. This enables them to be installed with
Loctite, and, avoids the need for any presses or pullers for their
installation and removal.
.5 Module, same as most standard RTR gears, Fly, Scalextric, Ninco, etc.
-15=1.5mm Bore
-20=2 mm BorePRICE: 1.00-US/EA. |

BWPB08-15 |

BWPB09-15 |

BWPB10-15 |

BWPB08-20 |

BWPB09-20 |

BWPB10-20
|

BW51148
11-48 Sidewinder gearset.
Fits Scalextric and Fly.
Fiberfilled nylon.
3.00/ea
|
|
BWA MOTORS
 |
| BWMS030
FF030 Size Motor
15MM Wide 19MM Long
1.5MM SHAFT
Still under development
NYA |
BWMS050
SLIMLINE
FF050 Size Motor
15MM WIDE 26.5MM LONG
1.5MM x 14.35mm Shaft
Drop in mild motor NC1 spec 050 sized replacement for Scalextric F1, MRRC and Revell/Monogram
TOS
expected early 2011 |

BWNC1
Double shaft NC1 Spec S Can Motor Snap in fit for Any RTR Slot Car Using
an S Can Motor
Scalextric, Fly, Ninco, Carrera, Revell/ Monogram, Cartrix $4.00 |
|
MISCELLANEOUS
 |
BW26DCUC

Adapter bushings to mount any 26D in a Cox La
Cucaracha
$6.00/pair |
|
CLICK TO ORDER |